All MIBs › ATM-FORUM-M4-MIB › atmfM4PhysPathTpAlarmSeverityIndex
atmfM4PhysPathTpAlarmSeverityIndex
Module: ATM-FORUM-M4-MIB
OID (symbolic): ATM-FORUM-M4-MIB::atmfM4PhysPathTpAlarmSeverityIndex
OID (numeric): 1.3.6.1.4.1.353.100.1.6.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description:
Specifies the index of the entry in the communications alarm severity profile table that should be used.
What is atmfM4PhysPathTpAlarmSeverityIndex?
Specifies which alarm severity profile entry should be applied to this physical path termination point, allowing operators to configure the severity classification of communications alarms on this path.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.100.1.6.1.3 snmpwalk -v2c -c public <target> ATM-FORUM-M4-MIB::atmfM4PhysPathTpAlarmSeverityIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.353.100.1.6.1.3.1 snmpget -v2c -c public <target> ATM-FORUM-M4-MIB::atmfM4PhysPathTpAlarmSeverityIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.353.100.1.6.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.353 | atmForum | ATM-FORUM-SNMP-M4-MIB |
| 1.3.6.1.4.1.353.100 | atmfM4MIB | ATM-FORUM-M4-MIB |
| 1.3.6.1.4.1.353.100.1 | atmfM4MIBObjects | ATM-FORUM-M4-MIB |
| 1.3.6.1.4.1.353.100.1.6 | atmfM4PhysPathTpTable | ATM-FORUM-M4-MIB |
| 1.3.6.1.4.1.353.100.1.6.1 | atmfM4PhysPathTpEntry | ATM-FORUM-M4-MIB |
| 1.3.6.1.4.1.353.100.1.6.1.3 | atmfM4PhysPathTpAlarmSeverityIndex | ATM-FORUM-M4-MIB |