All MIBs › ATM-FORUM-M4-MIB › atmfM4EquipHolderSwLoad
atmfM4EquipHolderSwLoad
Module: ATM-FORUM-M4-MIB
OID (symbolic): ATM-FORUM-M4-MIB::atmfM4EquipHolderSwLoad
OID (numeric): 1.3.6.1.4.1.353.100.1.29.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
An index into the installed software table, specifying the software that is to be loaded into the plug-in unit whenever an automatic reload of software is needed.
This attribute shall be present only when the Equipment Holder represents a slot.
What is atmfM4EquipHolderSwLoad?
Specifies which software load from the installed software table should be automatically loaded into the plug-in unit when a reload is required. This read-write attribute applies to slot-type equipment holders and controls automatic software recovery behavior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.100.1.29.1.4 snmpwalk -v2c -c public <target> ATM-FORUM-M4-MIB::atmfM4EquipHolderSwLoad
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.353.100.1.29.1.4.1 snmpget -v2c -c public <target> ATM-FORUM-M4-MIB::atmfM4EquipHolderSwLoad.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.353.100.1.29.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.353 | atmForum | ATM-FORUM-SNMP-M4-MIB |
| 1.3.6.1.4.1.353.100 | atmfM4MIB | ATM-FORUM-M4-MIB |
| 1.3.6.1.4.1.353.100.1 | atmfM4MIBObjects | ATM-FORUM-M4-MIB |
| 1.3.6.1.4.1.353.100.1.29 | atmfM4EquipHolderTable | ATM-FORUM-M4-MIB |
| 1.3.6.1.4.1.353.100.1.29.1 | atmfM4EquipHolderEntry | ATM-FORUM-M4-MIB |
| 1.3.6.1.4.1.353.100.1.29.1.4 | atmfM4EquipHolderSwLoad | ATM-FORUM-M4-MIB |