All MIBs › ASCEND-SDSL-MIB › sdslStatBertTimer
sdslStatBertTimer
Module: ASCEND-SDSL-MIB
OID (symbolic): ASCEND-SDSL-MIB::sdslStatBertTimer
OID (numeric): 1.3.6.1.4.1.529.4.8.2.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: BER test duration configuration. The BER test lasts for the duration of this timer.
What is sdslStatBertTimer?
This read-write enumeration sets the duration for Bit Error Rate tests. It controls test length. A value of 'five-minutes' configures a 5-minute BER test run.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.529.4.8.2.1.12 snmpwalk -v2c -c public <target> ASCEND-SDSL-MIB::sdslStatBertTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.529.4.8.2.1.12.1 snmpget -v2c -c public <target> ASCEND-SDSL-MIB::sdslStatBertTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.529.4.8.2.1.12.1 i <value>
Start monitoring Ascend Communications ADSL DSLAM/access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ASCEND-SDSL-MIB::sdslStatBertTimer OID value, configure state conditions and alerts, and monitor any Ascend Communications ADSL DSLAM/access equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.529 | ascend | ASCEND-MIB |
| 1.3.6.1.4.1.529.4 | advancedAgent | ASCEND-MIB |
| 1.3.6.1.4.1.529.4.8 | wanTypeSdsl | ASCEND-WAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.529.4.8.2 | sdslLineStatisticTable | ASCEND-SDSL-MIB |
| 1.3.6.1.4.1.529.4.8.2.1 | sdslLineStatisticEntry | ASCEND-SDSL-MIB |
| 1.3.6.1.4.1.529.4.8.2.1.12 | sdslStatBertTimer | ASCEND-SDSL-MIB |