ARUBAWIRED-VSFv2-MIB :: arubaWiredVsfv2SplitDetectConfigured

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ARUBAWIRED-VSFv2-MIB › arubaWiredVsfv2SplitDetectConfigured

arubaWiredVsfv2SplitDetectConfigured

Module: ARUBAWIRED-VSFv2-MIB

OID (symbolic): ARUBAWIRED-VSFv2-MIB::arubaWiredVsfv2SplitDetectConfigured

OID (numeric): 1.3.6.1.4.1.47196.4.1.1.3.15.1.0.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Split detection scheme configured on the VSF stack. Supported schemes: 'none`: No split detection. In the event of a stack split, multiple fragments can be active. `mgmt`: The management network interface will be used to detect a stack split. If multiple fragments are detected, only the stack fragment containing the 'primary' member will keep its network interfaces active.

What is arubaWiredVsfv2SplitDetectConfigured?

Indicates which split-detection scheme is configured for the VSF stack to handle scenarios where the stack divides into isolated fragments. Options include no detection, management-network-based detection, and others, determining how the stack responds to a split event.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.47196.4.1.1.3.15.1.0.2
snmpwalk -v2c -c public <target> ARUBAWIRED-VSFv2-MIB::arubaWiredVsfv2SplitDetectConfigured

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.47196.4.1.1.3.15.1.0.2.1
snmpget -v2c -c public <target> ARUBAWIRED-VSFv2-MIB::arubaWiredVsfv2SplitDetectConfigured.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.47196.4.1.1.3.15.1.0.2.1 i <value>

Start monitoring Aruba (HPE) ArubaOS-CX wired switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ARUBAWIRED-VSFv2-MIB::arubaWiredVsfv2SplitDetectConfigured OID value, configure state conditions and alerts, and monitor any Aruba (HPE) ArubaOS-CX wired switches from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.47196hpeARUBAWIRED-NETWORKING-OID
1.3.6.1.4.1.47196.4hpeNetworkingARUBAWIRED-NETWORKING-OID
1.3.6.1.4.1.47196.4.1wiredNetworkingDevicesARUBAWIRED-NETWORKING-OID
1.3.6.1.4.1.47196.4.1.1arubaOS_CXARUBAWIRED-NETWORKING-OID
1.3.6.1.4.1.47196.4.1.1.3wndFeaturesARUBAWIRED-NETWORKING-OID
1.3.6.1.4.1.47196.4.1.1.3.15arubaWiredVsfv2MIBARUBAWIRED-NETWORKING-OID
Numeric OIDNameModule
1.3.6.1.4.1.47196.4.1.1.3.15.1arubaWiredVsfv2ObjectsARUBAWIRED-VSFv2-MIB
1.3.6.1.4.1.47196.4.1.1.3.15.1.0arubaWiredVsfv2ConfigARUBAWIRED-VSFv2-MIB
1.3.6.1.4.1.47196.4.1.1.3.15.1.0.2arubaWiredVsfv2SplitDetectConfiguredARUBAWIRED-VSFv2-MIB