All MIBs › APPN-DLUR-MIB › dlurPuDlusSessnStatus
dlurPuDlusSessnStatus
Module: APPN-DLUR-MIB
OID (symbolic): APPN-DLUR-MIB::dlurPuDlusSessnStatus
OID (numeric): 1.3.6.1.2.1.34.5.1.2.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Status of the control session to the DLUS identified in
dlurPuActiveDlusName. This is a combination of the separate
states for the contention-winner and contention-loser sessions:
reset(1) - none of the cases below
pendingActive(2) - either contention-winner session or
contention-loser session is pending active
active(3) - contention-winner and contention-loser
sessions are both active
pendingInactive(4) - either contention-winner session or
contention-loser session is pending
inactive - this test is made AFTER the
'pendingActive' test.
The following matrix provides a different representation of
how the values of this object are related to the individual
states of the contention-winner and contention-loser sessions:
Conwinner
| pA | pI | A | X = !(pA | pI | A)
C ++++++++++++++++++++++++++++++++++
o pA | 2 | 2 | 2 | 2
n ++++++++++++++++++++++++++++++++++
l pI | 2 | 4 | 4 | 4
o ++++++++++++++++++++++++++++++++++
s A | 2 | 4 | 3 | 1
e ++++++++++++++++++++++++++++++++++
r X | 2 | 4 | 1 | 1
++++++++++++++++++++++++++++++++++
What is dlurPuDlusSessnStatus?
Reports the combined status of both the contention-winner and contention-loser CPSVRMGR control sessions between this PU's DLUR and its active DLUS. The combined state (reset, pending, active, etc.) reflects the health of the management session for this PU.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.34.5.1.2.1.1.7 snmpwalk -v2c -c public <target> APPN-DLUR-MIB::dlurPuDlusSessnStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.34.5.1.2.1.1.7.1 snmpget -v2c -c public <target> APPN-DLUR-MIB::dlurPuDlusSessnStatus.1
Start monitoring SNA/APPN gateway or router implementing DLUR with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPN-DLUR-MIB::dlurPuDlusSessnStatus OID value, configure state conditions and alerts, and monitor any SNA/APPN gateway or router implementing DLUR from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.34 | snanauMIB | SNA-NAU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.34.5 | dlurMIB | APPN-DLUR-MIB |
| 1.3.6.1.2.1.34.5.1 | dlurObjects | APPN-DLUR-MIB |
| 1.3.6.1.2.1.34.5.1.2 | dlurPuInfo | APPN-DLUR-MIB |
| 1.3.6.1.2.1.34.5.1.2.1 | dlurPuTable | APPN-DLUR-MIB |
| 1.3.6.1.2.1.34.5.1.2.1.1 | dlurPuEntry | APPN-DLUR-MIB |
| 1.3.6.1.2.1.34.5.1.2.1.1.7 | dlurPuDlusSessnStatus | APPN-DLUR-MIB |