All MIBs › APEX-MIB › apexUdpMapFollowDtcp
apexUdpMapFollowDtcp
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexUdpMapFollowDtcp
OID (numeric): 1.3.6.1.4.1.1166.1.31.18.1.1.4
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: Determines how the copy protection settings (CCI, APS, and CIT) within the PRK will be set. All outputs in UDP Port Mapping mode will use this setting for following input DTCP. Disabled - Use CTE configured settings if output in CTE encryption mode Enabled - Follow input DTCP
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(bcmr.ini, type='ini')
What is apexUdpMapFollowDtcp?
Controls how Digital Transmission Content Protection (DTCP) copy-protection settings — including CCI, APS, and CIT — are applied to all outputs operating in UDP Port Mapping mode. When enabled, the device follows the input DTCP settings rather than using locally configured CTE encryption values.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.18.1.1.4 snmpwalk -v2c -c public <target> APEX-MIB::apexUdpMapFollowDtcp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.18.1.1.4.1 snmpget -v2c -c public <target> APEX-MIB::apexUdpMapFollowDtcp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.18.1.1.4.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexUdpMapFollowDtcp OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.18 | apexUdpPortMapping | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.18.1 | apexUdpMapConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.18.1.1 | apexUdpMapConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.18.1.1.4 | apexUdpMapFollowDtcp | APEX-MIB |