All MIBs › APEX-MIB › apexUdpMapApplyChange
apexUdpMapApplyChange
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexUdpMapApplyChange
OID (numeric): 1.3.6.1.4.1.1166.1.31.18.1.2.1.2
Node type: OBJECT-TYPE
Type: ApplyDataToDeviceTYPE
Access: read-write
Description: The Apply for the row of data in the Udp Map Table.
A row in this table corresponds to the same row index in the Udp Map table.
This parameter MUST be set to 'apply' in order for any of the data in the Udp Map Table row to take effect in the APEX. This parameter MUST be set LAST after all other data in the Udp Map Table row has been configured.
@Config(config=no, reboot=no)
What is apexUdpMapApplyChange?
Acts as a commit trigger for a row in the UDP Map Table; the row's configuration does not take effect on the APEX until this parameter is set to 'apply'. It must be written after any other UDP Map Table parameters are changed to push those changes into operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.18.1.2.1.2 snmpwalk -v2c -c public <target> APEX-MIB::apexUdpMapApplyChange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.18.1.2.1.2.1 snmpget -v2c -c public <target> APEX-MIB::apexUdpMapApplyChange.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.18.1.2.1.2.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexUdpMapApplyChange OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.18 | apexUdpPortMapping | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.18.1 | apexUdpMapConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.18.1.2 | apexUdpMapApplyTable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.18.1.2.1 | apexUdpMapApplyEntry | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.18.1.2.1.2 | apexUdpMapApplyChange | APEX-MIB |