All MIBs › APEX-MIB › apexSimulcryptEmEnable
apexSimulcryptEmEnable
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexSimulcryptEmEnable
OID (numeric): 1.3.6.1.4.1.1166.1.31.20.1.1.3
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: Simulcrypt EM Enable. If set to 'enabled' the EM will display the Simulcrypt specific screens. User will be allowed to view Simulcrypt status and perform configuration changes via the EM. This parameter only enables and disables the ability to use the EM Simulcrypt screens. It does not enable or disable Simulcrypt as there is a specific Simulcrypt mode per output stream.
Once written, the change to this parameter will only take immediate effect. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexSimulcryptEmEnable?
Enables or disables access to Simulcrypt-specific status screens and configuration options on the Element Manager front panel. When disabled, operators cannot view or change Simulcrypt settings through the EM interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.20.1.1.3 snmpwalk -v2c -c public <target> APEX-MIB::apexSimulcryptEmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.20.1.1.3.1 snmpget -v2c -c public <target> APEX-MIB::apexSimulcryptEmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.20.1.1.3.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexSimulcryptEmEnable OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20 | apexEncryption | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1 | apexEncryptionConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1.1 | apexEncryptionConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1.1.3 | apexSimulcryptEmEnable | APEX-MIB |