All MIBs › APEX-MIB › apexSesContConfRedundType
apexSesContConfRedundType
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexSesContConfRedundType
OID (numeric): 1.3.6.1.4.1.1166.1.31.9.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The redundancy type for output streams in Session Control operating mode. - hotWarm indicates only 1 input stream, primary or secondary, is open at any one time. For multicast streams, primary will be joined initially. The secondary is joined after a failover (the primary will be dropped prior to joining the secondary).
- hotHot indicates both the primary and secondary streams are opened at the same time. For multicast streams, both streams are joined immediately.
Changes to the redundancy type cannot be made while there are active routes or sessions. All routes and sessions must be deleted prior to changing the redundancy type.
Once written, a save must be performed via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(sdv.ini, type='ini')
What is apexSesContConfRedundType?
Specifies the redundancy mode for output streams in Session Control mode, such as hot-warm where only one input stream (primary or secondary) is open at a time, with the secondary joined only after a failover event.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.1.1.6 snmpwalk -v2c -c public <target> APEX-MIB::apexSesContConfRedundType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.1.1.6.1 snmpget -v2c -c public <target> APEX-MIB::apexSesContConfRedundType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.9.1.1.6.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexSesContConfRedundType OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9 | apexSessionControl | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.1 | apexSessionControlConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.1.1 | apexSessionControlConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.1.1.6 | apexSesContConfRedundType | APEX-MIB |