All MIBs › APEX-MIB › apexSesContConfProtocol
apexSesContConfProtocol
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexSesContConfProtocol
OID (numeric): 1.3.6.1.4.1.1166.1.31.9.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The communication protocol for output streams in Session Control operating mode. This determines the type of protocol the APEX will use to communicate with an Edge Resource Manager/Switch Digital Video Manager. This parameter cannot be changed when there are any active Session Control mappings. All Session Control mappings must be removed prior to changing this protocol.
Once written, a save must be performed via the apexSaveConfig parameter and the APEX must be rebooted for the change to take effect.
@Config(config=yes, reboot=yes) @Save(apexSaveConfig, value=2) @File(sdv.ini, type='ini')
What is apexSesContConfProtocol?
Configures the communication protocol used for output transport streams when the APEX device operates in Session Control mode, determining how it interacts with an Edge Resource Manager or Switch Digital Video Manager. This setting cannot be changed while active sessions are in use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.1.1.1 snmpwalk -v2c -c public <target> APEX-MIB::apexSesContConfProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.1.1.1.1 snmpget -v2c -c public <target> APEX-MIB::apexSesContConfProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.9.1.1.1.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexSesContConfProtocol OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9 | apexSessionControl | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.1 | apexSessionControlConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.1.1 | apexSessionControlConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.1.1.1 | apexSesContConfProtocol | APEX-MIB |