All MIBs › APEX-MIB › apexRtspReportGbeInterfaces
apexRtspReportGbeInterfaces
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexRtspReportGbeInterfaces
OID (numeric): 1.3.6.1.4.1.1166.1.31.9.4.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This selects which pair of GBE interfaces are to be reported to the RTSP controller (ERM) via VREP. The pairedPortAssignment selection allows for both pairs of GBE interfaces to be reported to the ERM. This allows for all 4 GBE interfaces to be used by the ERM for session mappings. This effectively splits the APEX into 2x24 QAM devices where the first GBE interface pair (1&2) are assigned to the first 24 output QAM streams (output TS 1 - 24) and the second GBE pair (3&4) are assigned to the second 24 output QAM streams (output TS 25-48). Selecting reportGbe1and2 or reportGbe3and4 limits the ERM to 2 GBE interfaces only.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(sdv.ini, type='ini')
What is apexRtspReportGbeInterfaces?
Controls which pair of Gigabit Ethernet interfaces are reported to the RTSP controller (ERM) via VREP; setting this to pairedPortAssignment allows all four GBE interfaces to be reported and used by the ERM for session management.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.4.1.1.1 snmpwalk -v2c -c public <target> APEX-MIB::apexRtspReportGbeInterfaces
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.4.1.1.1.1 snmpget -v2c -c public <target> APEX-MIB::apexRtspReportGbeInterfaces.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.9.4.1.1.1.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexRtspReportGbeInterfaces OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9 | apexSessionControl | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4 | apexRtsp | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4.1 | apexRtspConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4.1.1 | apexRtspConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4.1.1.1 | apexRtspReportGbeInterfaces | APEX-MIB |