All MIBs › APEX-MIB › apexRtspConfMhaUdpMapEnable
apexRtspConfMhaUdpMapEnable
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexRtspConfMhaUdpMapEnable
OID (numeric): 1.3.6.1.4.1.1166.1.31.9.4.1.9.1
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: Indicates if the UDP Map is populated in the Update message sent by the APEX to the ERM when in MHA mode.
When 'enabled', the APEX will report UDP ports available. When 'disabled', the APEX will include the UDP Map field but will not populate it with data.
Once written, the change to this table will only take immediate effect after apexRtspConfControllerApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Commit(param=apexRtspConfControllerApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(sdv.ini, type='ini')
What is apexRtspConfMhaUdpMapEnable?
Controls whether the APEX reports available UDP port mappings to the ERM in MHA mode Update messages. When enabled, the APEX populates UDP port availability data; when disabled, the UDP Map field is included but left empty.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.4.1.9.1 snmpwalk -v2c -c public <target> APEX-MIB::apexRtspConfMhaUdpMapEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.4.1.9.1.1 snmpget -v2c -c public <target> APEX-MIB::apexRtspConfMhaUdpMapEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.9.4.1.9.1.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexRtspConfMhaUdpMapEnable OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9 | apexSessionControl | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4 | apexRtsp | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4.1 | apexRtspConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4.1.9 | apexRtspConfMhaGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4.1.9.1 | apexRtspConfMhaUdpMapEnable | APEX-MIB |