All MIBs › APEX-MIB › apexRtspConfMhaSbeEncryptionMode
apexRtspConfMhaSbeEncryptionMode
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexRtspConfMhaSbeEncryptionMode
OID (numeric): 1.3.6.1.4.1.1166.1.31.9.4.1.10.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter is used to set the Session based Encryption Mode. It applies to all session based encryption sessions.
- 'full' - The APEX will use Full encryption.
- 'fwk' - The APEX will use Fixed Working Key (FWK) encryption.
- 'fpk' - The APEX will use Fixed Program Key (FPK) encryption. The APEX will not attempt to get EMMs.
Once written, the change to this parameter will only take immediate effect after apexRtspConfMhaSbeApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Commit(param=apexRtspConfMhaSbeApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(sdv.ini, type='ini')
What is apexRtspConfMhaSbeEncryptionMode?
Sets the encryption mode for all session-based encryption (SBE) sessions on the APEX, choosing between full encryption, Fixed Working Key (FWK), or Fixed Program Key (FPK) modes. This controls the strength and key rotation strategy applied to encrypted content streams.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.4.1.10.1 snmpwalk -v2c -c public <target> APEX-MIB::apexRtspConfMhaSbeEncryptionMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.4.1.10.1.1 snmpget -v2c -c public <target> APEX-MIB::apexRtspConfMhaSbeEncryptionMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.9.4.1.10.1.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexRtspConfMhaSbeEncryptionMode OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9 | apexSessionControl | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4 | apexRtsp | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4.1 | apexRtspConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4.1.10 | apexRtspConfMhaSbe | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.4.1.10.1 | apexRtspConfMhaSbeEncryptionMode | APEX-MIB |