All MIBs › APEX-MIB › apexRpcDataCarouselProgram
apexRpcDataCarouselProgram
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexRpcDataCarouselProgram
OID (numeric): 1.3.6.1.4.1.1166.1.31.9.3.1.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Indicates which Input Program Number to use for the Data Carousel. The data carousel in SDV mode (RPC or RTSP) is on a fixed PMT PID along with a fixed component PID. In order to maintain these PID values, the APEX will check for a specific input service number defined by this parameter. This service mapping is assumed to be the Data Carousel mapping. The APEX will maintain the PMT PID value along with the component PID value. To facilitate this mapping, the Data Carousel input/output program number is configurable. - Data Carousel Service Number Default: 0xF38F (62351)
The PMT PID and component PID will be determined by the APEX by analyzing the PAT and PMT based on the program number configured. A program number of zero (0) indicates that there is no data carousel.
Once written, the change to this parameter will take immediate effect. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(sdv.ini, type='ini')
What is apexRpcDataCarouselProgram?
Specifies the input program number assigned to the Data Carousel in SDV mode (RPC or RTSP), allowing the APEX to maintain fixed PMT and component PIDs by associating them with a known service number.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.3.1.1.1 snmpwalk -v2c -c public <target> APEX-MIB::apexRpcDataCarouselProgram
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.9.3.1.1.1.1 snmpget -v2c -c public <target> APEX-MIB::apexRpcDataCarouselProgram.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.9.3.1.1.1.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexRpcDataCarouselProgram OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9 | apexSessionControl | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.3 | apexRpc | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.3.1 | apexRpcConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.3.1.1 | apexRpcConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.9.3.1.1.1 | apexRpcDataCarouselProgram | APEX-MIB |