APEX-MIB :: apexRdsInitialEcmRetryInterval

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPEX-MIBapexRdsInitialEcmRetryInterval

apexRdsInitialEcmRetryInterval

Module: APEX-MIB

OID (symbolic): APEX-MIB::apexRdsInitialEcmRetryInterval

OID (numeric): 1.3.6.1.4.1.1166.1.31.19.1.1.14

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This parameter is used to configure RDS2 server ECM retry time. This value defines when the next retry will be performed by the host. Units are seconds.

Once written, the change to this parameter will only take immediate effect after apexRdsConfigApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via apexSaveConfig.

@Config(config=yes, reboot=no) @Commit(param=apexRdsConfigApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')

What is apexRdsInitialEcmRetryInterval?

Sets the number of seconds the APEX device waits before retrying an ECM (Entitlement Control Message) request to the RDS-2 server after an initial failure. The configured value only takes effect after apexRdsConfigApplyChange is set to 'apply'.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.19.1.1.14
snmpwalk -v2c -c public <target> APEX-MIB::apexRdsInitialEcmRetryInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.19.1.1.14.1
snmpget -v2c -c public <target> APEX-MIB::apexRdsInitialEcmRetryInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.19.1.1.14.1 i <value>

Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexRdsInitialEcmRetryInterval OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.1giproductsBCS-IDENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.1.31apexAPEX-MIB
1.3.6.1.4.1.1166.1.31.19apexRdsAPEX-MIB
1.3.6.1.4.1.1166.1.31.19.1apexRdsConfigAPEX-MIB
1.3.6.1.4.1.1166.1.31.19.1.1apexRdsConfigGeneralAPEX-MIB
1.3.6.1.4.1.1166.1.31.19.1.1.14apexRdsInitialEcmRetryIntervalAPEX-MIB