All MIBs › APEX-MIB › apexRdsConfigRds2Enable
apexRdsConfigRds2Enable
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexRdsConfigRds2Enable
OID (numeric): 1.3.6.1.4.1.1166.1.31.19.1.1.12
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: Indicates whether RDS-2 Interface is enabled or disabled.
Once written, the change to this parameter will only take immediate effect after apexRdsConfigApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via apexSaveConfig.
@Config(config=yes, reboot=no) @Commit(param=apexRdsConfigApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexRdsConfigRds2Enable?
Controls whether the RDS-2 interface on the APEX device is enabled or disabled. The change becomes active only after apexRdsConfigApplyChange is set to 'apply', and must be saved to persist across reboots.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.19.1.1.12 snmpwalk -v2c -c public <target> APEX-MIB::apexRdsConfigRds2Enable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.19.1.1.12.1 snmpget -v2c -c public <target> APEX-MIB::apexRdsConfigRds2Enable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.19.1.1.12.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexRdsConfigRds2Enable OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.19 | apexRds | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.19.1 | apexRdsConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.19.1.1 | apexRdsConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.19.1.1.12 | apexRdsConfigRds2Enable | APEX-MIB |