All MIBs › APEX-MIB › apexQamRfRedundStatusRemError
apexQamRfRedundStatusRemError
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamRfRedundStatusRemError
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.2.7.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Status of REM1000 taken from error_code field in REM1000 ack() response (defined in REM1000 Message Stream Protocol).
Valid only when apexQamRfRedundConfigRemConnection is other than 'none'.
Values as defined in REM1000 MSP: 0x00 - No Errors. No problems switching, parsing switch_port() message, or with HW. 0x01 - Invalid apex_id value in prior switch_port() message. 0x02 - Invalid msg_type value in prior switch_port() message. 0x03 - Invalid port value in prior switch_port() message. 0x04 - Error switching after receiving valid switch_port() message. 0x05 - Minor HW error. REM can still switch. 0x81 - Apex_id Conflict. Switch_port() messages with the same apex_id have been received from multiple APEXs. Switch reset to pass- through configuration. 0x85 - Major HW error. REM failure. Switch reset to pass-through configuration.
What is apexQamRfRedundStatusRemError?
Reports the error code returned by the REM1000 device in its acknowledgment messages, as defined in the REM1000 Message Stream Protocol. A value of 0x00 means no errors; non-zero values indicate specific switching or communication problems.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.2.7.1.6 snmpwalk -v2c -c public <target> APEX-MIB::apexQamRfRedundStatusRemError
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.2.7.1.6.1 snmpget -v2c -c public <target> APEX-MIB::apexQamRfRedundStatusRemError.1
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamRfRedundStatusRemError OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.2 | apexQamStatus | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.2.7 | apexQamRfRedundancyStatus | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.2.7.1 | apexQamRfRedundancyStatusGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.2.7.1.6 | apexQamRfRedundStatusRemError | APEX-MIB |