All MIBs › APEX-MIB › apexQamRfRedundConfigRemDirectIpOctet1
apexQamRfRedundConfigRemDirectIpOctet1
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamRfRedundConfigRemDirectIpOctet1
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.6.1.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Target REM1000 IP address first octet. Only used when apexQamRfRedundConfigRemConnection is set to 'direct'. The remainder of the IP address will be filled in by the APEX. The IP address used will be reflected in apexDataIpAddrInUse.
Once written, the change to this parameter will only take immediate effect after apexQamRfRedundConfigApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Commit(param=apexQamRfRedundConfigApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexQamRfRedundConfigRemDirectIpOctet1?
Specifies the first octet of the REM1000's IP address when using 'direct' connection mode; the APEX fills in the remaining octets automatically. This partial address configuration is ignored in any other connection mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.9 snmpwalk -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigRemDirectIpOctet1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.9.1 snmpget -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigRemDirectIpOctet1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.9.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamRfRedundConfigRemDirectIpOctet1 OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1 | apexQamConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6 | apexQamRfRedundancyConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1 | apexQamRfRedundancyConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.9 | apexQamRfRedundConfigRemDirectIpOctet1 | APEX-MIB |