All MIBs › APEX-MIB › apexQamRfRedundConfigRemConnection
apexQamRfRedundConfigRemConnection
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamRfRedundConfigRemConnection
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.6.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Configures how the APEX is connected to the REM1000.
'none' - Not connecting to REM1000. 'direct' - Connected to REM1000 dedicated IP interface through APEX Data IP (Enet2). Broadcast connection is always used in this case. Cannot be set to 'direct' if the QAM RF Redundancy UDP Port is in use on the Data IP Port (Enet2). QAM RF Redundancy UDP Port value is found in apexQamRfRedundStatusUdpPort. 'common' - Connected to REM1000 OAM&P interface through APEX OAM&P IP (Enet 1). Requires user to configure REM1000 IP address in apexQamRfRedundConfigRemCommonIpAddr. Cannot be set to 'common' if the QAM RF Redundancy UDP Port is in use on the OAM&P IP (Enet 1). QAM RF Redundancy UDP Port value is found in apexQamRfRedundStatusUdpPort.
Once written, the change to this parameter will only take immediate effect after apexQamRfRedundConfigApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Commit(param=apexQamRfRedundConfigApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexQamRfRedundConfigRemConnection?
Configures the type of connection between the APEX and the REM1000 RF switch controller: 'none' for no REM1000, 'direct' for a dedicated IP interface, or 'common' for a shared network path. This setting determines how failover commands are communicated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.3 snmpwalk -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigRemConnection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.3.1 snmpget -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigRemConnection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.3.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamRfRedundConfigRemConnection OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1 | apexQamConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6 | apexQamRfRedundancyConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1 | apexQamRfRedundancyConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.3 | apexQamRfRedundConfigRemConnection | APEX-MIB |