APEX-MIB :: apexQamRfRedundConfigRemCommonIpAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPEX-MIBapexQamRfRedundConfigRemCommonIpAddr

apexQamRfRedundConfigRemCommonIpAddr

Module: APEX-MIB

OID (symbolic): APEX-MIB::apexQamRfRedundConfigRemCommonIpAddr

OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.6.1.5

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: Target REM1000 IP address. Must be singlecast address. Only used when apexQamRfRedundConfigRemConnection is set to 'common'.

Once written, the change to this parameter will only take immediate effect after apexQamRfRedundConfigApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.

@Config(config=yes, reboot=no) @Commit(param=apexQamRfRedundConfigApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')

What is apexQamRfRedundConfigRemCommonIpAddr?

Sets the unicast IP address of the REM1000 switch controller used when the connection mode is 'common'. This address is only active when apexQamRfRedundConfigRemConnection is configured to 'common'.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.5
snmpwalk -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigRemCommonIpAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.5.1
snmpget -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigRemCommonIpAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.5.1 a <value>

Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamRfRedundConfigRemCommonIpAddr OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.1giproductsBCS-IDENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.1.31apexAPEX-MIB
1.3.6.1.4.1.1166.1.31.8apexQamAPEX-MIB
1.3.6.1.4.1.1166.1.31.8.1apexQamConfigAPEX-MIB
1.3.6.1.4.1.1166.1.31.8.1.6apexQamRfRedundancyConfigAPEX-MIB
1.3.6.1.4.1.1166.1.31.8.1.6.1apexQamRfRedundancyConfigGeneralAPEX-MIB
1.3.6.1.4.1.1166.1.31.8.1.6.1.5apexQamRfRedundConfigRemCommonIpAddrAPEX-MIB