All MIBs › APEX-MIB › apexQamRfRedundConfigEnable
apexQamRfRedundConfigEnable
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamRfRedundConfigEnable
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.6.1.2
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: Enables RF redundancy mode, allowing the APEX to failover to backup RF port and communicate with the REM1000. Allows for failover/ switching without requiring a REM1000 connection.
Cannot be 'enabled' if the backup port (RF Port 6) is not present (there is no QAM Module in QAM slot 3).
Cannot be 'enabled' if there are any mappings to any QAM Channel on the backup port. RF Port 6, QAM Channels 6A to 6H (Output Transport Streams 41 to 48).
Once written, the change to this parameter will only take immediate effect after apexQamRfRedundConfigApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Commit(param=apexQamRfRedundConfigApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexQamRfRedundConfigEnable?
Enables or disables RF redundancy mode on the APEX, allowing it to failover to the backup RF port (RF Port 6) and optionally communicate with a REM1000 switch controller. Redundancy cannot be enabled if the backup port is not physically present.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.2 snmpwalk -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.2.1 snmpget -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.2.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamRfRedundConfigEnable OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1 | apexQamConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6 | apexQamRfRedundancyConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1 | apexQamRfRedundancyConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.2 | apexQamRfRedundConfigEnable | APEX-MIB |