All MIBs › APEX-MIB › apexQamRfRedundConfigAutoSwitchBack
apexQamRfRedundConfigAutoSwitchBack
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamRfRedundConfigAutoSwitchBack
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.6.1.6
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: This is the enable/disable of automatic switch back to the previous RF port from backup for QAM RF redundancy. When 'enabled', switch back to the previous RF port will automatically occur when the RF port comes back online. When 'disabled', the user must force back to the previous RF port using apexQamRfRedundConfigForceSwitch.
Once written, the change to this parameter will only take immediate effect after apexQamRfRedundConfigApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Commit(param=apexQamRfRedundConfigApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexQamRfRedundConfigAutoSwitchBack?
Controls whether the APEX automatically returns to its primary RF port once that port comes back online after a failover. When disabled, an operator must manually force the switchback.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.6 snmpwalk -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigAutoSwitchBack
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.6.1 snmpget -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigAutoSwitchBack.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.6.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamRfRedundConfigAutoSwitchBack OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1 | apexQamConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6 | apexQamRfRedundancyConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1 | apexQamRfRedundancyConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.6 | apexQamRfRedundConfigAutoSwitchBack | APEX-MIB |