APEX-MIB :: apexQamRfRedundConfigApexId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPEX-MIBapexQamRfRedundConfigApexId

apexQamRfRedundConfigApexId

Module: APEX-MIB

OID (symbolic): APEX-MIB::apexQamRfRedundConfigApexId

OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.6.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Identifies which set of RF inputs on the REM1000 are associated with this APEX.

Once written, the change to this parameter will only take immediate effect after apexQamRfRedundConfigApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.

@Config(config=yes, reboot=no) @Commit(param=apexQamRfRedundConfigApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')

What is apexQamRfRedundConfigApexId?

Identifies which group of RF inputs on the REM1000 are paired with this APEX unit, allowing the switch controller to route the correct signals during a failover event. The change takes effect only after apexQamRfRedundConfigApplyChange is set to 'apply'.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.4
snmpwalk -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigApexId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.4.1
snmpget -v2c -c public <target> APEX-MIB::apexQamRfRedundConfigApexId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.6.1.4.1 i <value>

Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamRfRedundConfigApexId OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.1giproductsBCS-IDENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.1.31apexAPEX-MIB
1.3.6.1.4.1.1166.1.31.8apexQamAPEX-MIB
1.3.6.1.4.1.1166.1.31.8.1apexQamConfigAPEX-MIB
1.3.6.1.4.1.1166.1.31.8.1.6apexQamRfRedundancyConfigAPEX-MIB
1.3.6.1.4.1.1166.1.31.8.1.6.1apexQamRfRedundancyConfigGeneralAPEX-MIB
1.3.6.1.4.1.1166.1.31.8.1.6.1.4apexQamRfRedundConfigApexIdAPEX-MIB