All MIBs › APEX-MIB › apexQamRfConfigSymbolRate
apexQamRfConfigSymbolRate
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamRfConfigSymbolRate
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.4.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The Symbol Rate Setting of the QAM Channels enabled on the RF Port. It is in symbols per second (sps).
When QAM Transmission Mode is 'annexA-DVB' the range is 800,000 sps to 6,980,000 sps in 1000 sps steps.
When QAM Transmission Mode is 'annexC-Asia-Pacific' the range is 800,000 sps to 5,310,000 sps in 1000 sps steps.
The APEX will correct values not on a 1000 sps boundary so the user or management system does not need to enforce the step size.
When QAM Transmission Mode is 'annexB-ATSC-DCII' this parameter is not configurable and is set by the APEX based on QAM Modulation Mode.
For 4x4 QAM Modules: This parameter applies on an RF pair basis, 1-2 and 7-8. APEX1000 will use only odd table indices. Even index of pair will be ignored and set to value for odd index of pair.
@Range(step=1000)
What is apexQamRfConfigSymbolRate?
Defines the symbol rate in symbols per second for the QAM channels on an RF port, with valid ranges that differ depending on whether the transmission mode is Annex A (DVB), Annex B (ATSC/DCII), or Annex C (Asia-Pacific).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.4.1.4 snmpwalk -v2c -c public <target> APEX-MIB::apexQamRfConfigSymbolRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.4.1.4.1 snmpget -v2c -c public <target> APEX-MIB::apexQamRfConfigSymbolRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.4.1.4.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamRfConfigSymbolRate OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1 | apexQamConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.4 | apexQamRfConfigTable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1 | apexQamRfConfigEntry | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.4 | apexQamRfConfigSymbolRate | APEX-MIB |