All MIBs › APEX-MIB › apexQamRfConfigRfChanSpacing
apexQamRfConfigRfChanSpacing
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamRfConfigRfChanSpacing
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.4.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The Channel spacing for the QAM Channels enabled on the RF Port. This value must be in Hz in the range 1,000,000 Hz to 8,000,000 Hz in 500,000 Hz steps.
The APEX will correct values not on a 500,000 Hz boundary so the user or management system does not need to enforce the step size.
For 2x4/2x8 QAM Modules: When Transmission Mode is 'annexA-DVB' this value is configurable. Note that number of channels enabled can be affected by changing channel spacing. The total bandwidth of the RF must not exceed 48 MHz.
For 2x4/2x8 QAM Modules: When Transmission Mode is 'annexB-ATSC-DCII' or 'annexC-Asia-Pacific' this value is fixed and is set by the APEX.
For 4x4 QAM Modules: This value is fixed and is set by the APEX.
@Range(step=500000)
What is apexQamRfConfigRfChanSpacing?
Sets the frequency spacing in Hz between adjacent QAM channels on an RF port, configurable from 1 MHz to 8 MHz in 500 kHz steps; the APEX automatically rounds values not on a 500 kHz boundary.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.4.1.10 snmpwalk -v2c -c public <target> APEX-MIB::apexQamRfConfigRfChanSpacing
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.4.1.10.1 snmpget -v2c -c public <target> APEX-MIB::apexQamRfConfigRfChanSpacing.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.4.1.10.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamRfConfigRfChanSpacing OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1 | apexQamConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.4 | apexQamRfConfigTable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1 | apexQamRfConfigEntry | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.10 | apexQamRfConfigRfChanSpacing | APEX-MIB |