All MIBs › APEX-MIB › apexQamRfConfigNumChannelsEnabled
apexQamRfConfigNumChannelsEnabled
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamRfConfigNumChannelsEnabled
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.4.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The number of QAM Channels enabled on the RF Port.
APEX will not allow enabling of more channels than the installed QAM Module will support. Note that when this parameter is changed and applied there will be an interruption in service on all active channels on this RF Port.
When QAM Transmission Mode is 'annexA-DVB', enabled channels is also limited by the Channel Spacing such that the total bandwidth of the RF must not exceed 48 MHz.
What is apexQamRfConfigNumChannelsEnabled?
Configures how many QAM channels are active on a given RF port, capped by the physical capability of the installed QAM module. Changing this value causes a brief service interruption on all active channels of that port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.4.1.2 snmpwalk -v2c -c public <target> APEX-MIB::apexQamRfConfigNumChannelsEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.4.1.2.1 snmpget -v2c -c public <target> APEX-MIB::apexQamRfConfigNumChannelsEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.4.1.2.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamRfConfigNumChannelsEnabled OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1 | apexQamConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.4 | apexQamRfConfigTable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1 | apexQamRfConfigEntry | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.2 | apexQamRfConfigNumChannelsEnabled | APEX-MIB |