All MIBs › APEX-MIB › apexQamModuleUpgradeApplyChange
apexQamModuleUpgradeApplyChange
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamModuleUpgradeApplyChange
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.2.3
Node type: OBJECT-TYPE
Type: ApplyDataToDeviceTYPE
Access: read-write
Description: This is the Apply for QAM Module Upgrade Slot and Code.
This parameter MUST be set to 'apply' in order for apexQamModuleUpgradeSlot and apexQamModuleUpgradeCode to take effect. This parameter MUST be set LAST after apexQamModuleUpgradeSlot and apexQamModuleUpgradeCode has been configured.
The APEX will set this to applyNotInProgressInvalidData if the Upgrade Code is incorrect and the QAM Module is not upgraded.
@Config(config=no, reboot=no)
What is apexQamModuleUpgradeApplyChange?
Acts as the commit trigger for a QAM Module channel-capacity upgrade; it must be set to 'apply' last, after the target slot and upgrade code have been written, before the upgrade takes effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.2.3 snmpwalk -v2c -c public <target> APEX-MIB::apexQamModuleUpgradeApplyChange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.2.3.1 snmpget -v2c -c public <target> APEX-MIB::apexQamModuleUpgradeApplyChange.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.2.3.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamModuleUpgradeApplyChange OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1 | apexQamConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.2 | apexQamModuleUpgrade | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.2.3 | apexQamModuleUpgradeApplyChange | APEX-MIB |