All MIBs › APEX-MIB › apexQamModuleStatCodeInitError
apexQamModuleStatCodeInitError
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamModuleStatCodeInitError
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.2.2.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Code initialization error of the 4x4 QAM Module.
Used only for 4x4 QAM Modules.
Indicates a code, firmware, or FPGA startup issue.
The module failed to load the FW/FPGA files to the devices or valid FW/FPGA files could not be found in the module.
Code download is required to restore the module.
What is apexQamModuleStatCodeInitError?
Reports a code initialization failure on a 4x4 QAM module, indicating the module was unable to load or locate valid firmware or FPGA files during startup. This prevents the module from becoming operational and requires investigation of the firmware image or hardware.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.2.2.1.18 snmpwalk -v2c -c public <target> APEX-MIB::apexQamModuleStatCodeInitError
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.2.2.1.18.1 snmpget -v2c -c public <target> APEX-MIB::apexQamModuleStatCodeInitError.1
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamModuleStatCodeInitError OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.2 | apexQamStatus | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.2.2 | apexQamModuleStatusTable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1 | apexQamModuleStatusEntry | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.18 | apexQamModuleStatCodeInitError | APEX-MIB |