All MIBs › APEX-MIB › apexQamConfigApplyChange
apexQamConfigApplyChange
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexQamConfigApplyChange
OID (numeric): 1.3.6.1.4.1.1166.1.31.8.1.3.1.2
Node type: OBJECT-TYPE
Type: ApplyDataToDeviceTYPE
Access: read-write
Description: The Apply for a row of data in apexQamRfConfigTable.
A row in this table corresponds to the same row index in the apexQamRfConfigTable.
This parameter MUST be set to 'apply' in order for any of the data in the rows to take effect in the APEX. This parameter MUST be set LAST after all other data in the configuration table rows has been configured.
@Config(config=no, reboot=no)
What is apexQamConfigApplyChange?
Serves as the commit trigger for a row of QAM RF configuration settings in apexQamRfConfigTable; the row's changes are not applied to the APEX until this object is set to 'apply'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.3.1.2 snmpwalk -v2c -c public <target> APEX-MIB::apexQamConfigApplyChange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.8.1.3.1.2.1 snmpget -v2c -c public <target> APEX-MIB::apexQamConfigApplyChange.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.8.1.3.1.2.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexQamConfigApplyChange OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8 | apexQam | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1 | apexQamConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.3 | apexQamConfigApplyTable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.3.1 | apexQamConfigApplyEntry | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.8.1.3.1.2 | apexQamConfigApplyChange | APEX-MIB |