All MIBs › APEX-MIB › apexPsiDetectionTimeout
apexPsiDetectionTimeout
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexPsiDetectionTimeout
OID (numeric): 1.3.6.1.4.1.1166.1.31.15.1.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The loss of input PSI detection timeout value. When PSI detection is enabled, this is the number of seconds the APEX will use to determine if an input PSI message is missing. Each PSI message previously extracted will be checked to determine that it is still being received based on this setting.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexPsiDetectionTimeout?
Sets the number of seconds the APEX waits before declaring an input PSI message (PAT or PMT) as missing. This timeout value determines how quickly the device reacts to PSI loss when PSI detection is enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.15.1.1.2 snmpwalk -v2c -c public <target> APEX-MIB::apexPsiDetectionTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.15.1.1.2.1 snmpget -v2c -c public <target> APEX-MIB::apexPsiDetectionTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.15.1.1.2.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexPsiDetectionTimeout OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15 | apexPsi | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1 | apexPsiConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1.1 | apexPsiConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1.1.2 | apexPsiDetectionTimeout | APEX-MIB |