All MIBs › APEX-MIB › apexPsiDetectionEnabled
apexPsiDetectionEnabled
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexPsiDetectionEnabled
OID (numeric): 1.3.6.1.4.1.1166.1.31.15.1.1.1
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: The loss of input PSI detection enabled or disabled setting. When enabled, the APEX will check for missing input PSI (PATs and PMTs) based on the PSI detection timeout value. When an input PSI message is determined to be missing, the APEX will assume the input service or services are no longer being streamed and unmap the service(s). This checking only occurs after an initial PSI message has been extracted.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexPsiDetectionEnabled?
Controls whether the APEX device monitors input transport streams for missing PSI messages (PATs and PMTs). When enabled, the device will detect PSI loss based on a configurable timeout and treat the affected input service or stream as absent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.15.1.1.1 snmpwalk -v2c -c public <target> APEX-MIB::apexPsiDetectionEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.15.1.1.1.1 snmpget -v2c -c public <target> APEX-MIB::apexPsiDetectionEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.15.1.1.1.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexPsiDetectionEnabled OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15 | apexPsi | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1 | apexPsiConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1.1 | apexPsiConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1.1.1 | apexPsiDetectionEnabled | APEX-MIB |