All MIBs › APEX-MIB › apexProgramBasedPmtOffset
apexProgramBasedPmtOffset
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexProgramBasedPmtOffset
OID (numeric): 1.3.6.1.4.1.1166.1.31.15.1.1.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Program Based PID Remapping PMT PID offset. Determines the first PMT PID to use when Program Based algorithm selected. PMT PID is calculated as: (Program Number + Offset) * 16
Program Numbers can range from 1 - 255, allowing for PMTs to start at 0x0020 or 0x0030 up to 0x1000 and 0x1010.
Changes to offset will NOT require a reboot, but if there are any service mappings already in use on an output in Program Based mode, then the change will NOT take effect and the user will have to remove all mappings on outputs in Program Based mode.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexProgramBasedPmtOffset?
Sets the offset value used to calculate the PMT PID when the Program Based PID remapping algorithm is selected, with the PMT PID computed as (Program Number + Offset) multiplied by 16. Adjusting this offset shifts the entire block of PMT PIDs assigned to programs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.15.1.1.9 snmpwalk -v2c -c public <target> APEX-MIB::apexProgramBasedPmtOffset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.15.1.1.9.1 snmpget -v2c -c public <target> APEX-MIB::apexProgramBasedPmtOffset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.15.1.1.9.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexProgramBasedPmtOffset OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15 | apexPsi | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1 | apexPsiConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1.1 | apexPsiConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1.1.9 | apexProgramBasedPmtOffset | APEX-MIB |