All MIBs › APEX-MIB › apexPidMapInputPid
apexPidMapInputPid
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexPidMapInputPid
OID (numeric): 1.3.6.1.4.1.1166.1.31.11.1.1.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Input MPEG PID to multiplex. When PID Remapping for an output is enabled, the input PID value and output PID value can be different. When PID Remapping for an output is disabled, the input and output PIDs must be the same. Input PID 0 (PAT PID) cannot be mapped by the user.
What is apexPidMapInputPid?
Specifies the MPEG Packet Identifier (PID) from the input stream that this PID map entry should extract and multiplex. When PID remapping is enabled on the output, this input PID can be mapped to a different output PID value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.11.1.1.1.8 snmpwalk -v2c -c public <target> APEX-MIB::apexPidMapInputPid
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.11.1.1.1.8.1 snmpget -v2c -c public <target> APEX-MIB::apexPidMapInputPid.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.11.1.1.1.8.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexPidMapInputPid OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.11 | apexAncillaryPidMapping | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.11.1 | apexPidMapConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.11.1.1 | apexPidMapTable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1 | apexPidMapEntry | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.8 | apexPidMapInputPid | APEX-MIB |