All MIBs › APEX-MIB › apexPidMapApplyChange
apexPidMapApplyChange
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexPidMapApplyChange
OID (numeric): 1.3.6.1.4.1.1166.1.31.11.1.2.1.2
Node type: OBJECT-TYPE
Type: ApplyDataToDeviceTYPE
Access: read-write
Description: The Apply for the row of data in the PID Map Table.
A row in this table corresponds to the same row index in the PID Map table.
This parameter MUST be set to 'apply' in order for any of the data in the PID Map Table row to take effect in the APEX. This parameter MUST be set LAST after all other data in the PID Map Table row has been configured.
@Config(config=no, reboot=no)
What is apexPidMapApplyChange?
Triggers the activation of pending configuration changes for a specific row in the PID Map table. New PID mapping settings do not take effect on the APEX device until this parameter is explicitly set to 'apply'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.11.1.2.1.2 snmpwalk -v2c -c public <target> APEX-MIB::apexPidMapApplyChange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.11.1.2.1.2.1 snmpget -v2c -c public <target> APEX-MIB::apexPidMapApplyChange.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.11.1.2.1.2.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexPidMapApplyChange OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.11 | apexAncillaryPidMapping | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.11.1 | apexPidMapConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.11.1.2 | apexPidMapApplyTable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.11.1.2.1 | apexPidMapApplyEntry | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.11.1.2.1.2 | apexPidMapApplyChange | APEX-MIB |