All MIBs › APEX-MIB › apexOutputTsUtilMonSetAlarmDelay
apexOutputTsUtilMonSetAlarmDelay
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexOutputTsUtilMonSetAlarmDelay
OID (numeric): 1.3.6.1.4.1.1166.1.31.14.1.4.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This is the time in seconds that the Output Transport Stream must be at or exceeding apexOutputTsUtilMonAlarmThreshold before setting the apexAlarmOutputUtilizationFault alarm.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexOutputTsUtilMonSetAlarmDelay?
Sets how many seconds the Output Transport Stream must continuously meet or exceed the utilization alarm threshold before the fault alarm is actually raised. This delay prevents transient spikes from triggering spurious alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.14.1.4.1.2 snmpwalk -v2c -c public <target> APEX-MIB::apexOutputTsUtilMonSetAlarmDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.14.1.4.1.2.1 snmpget -v2c -c public <target> APEX-MIB::apexOutputTsUtilMonSetAlarmDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.14.1.4.1.2.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexOutputTsUtilMonSetAlarmDelay OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14 | apexOutputTransport | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1 | apexOutputTsConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1.4 | apexOutputTsUtilizationMonitoring | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1.4.1 | apexOutputTsUtilizationMonitorGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1.4.1.2 | apexOutputTsUtilMonSetAlarmDelay | APEX-MIB |