All MIBs › APEX-MIB › apexOutputTsUtilMonClearAlarmDelay
apexOutputTsUtilMonClearAlarmDelay
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexOutputTsUtilMonClearAlarmDelay
OID (numeric): 1.3.6.1.4.1.1166.1.31.14.1.4.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This is the time in seconds that the Output Transport Stream must be below apexOutputTsUtilMonAlarmThreshold before clearing the apexAlarmOutputUtilizationFault alarm.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexOutputTsUtilMonClearAlarmDelay?
Sets how many seconds the Output Transport Stream utilization must remain below the alarm threshold before the existing fault alarm is cleared. This hysteresis delay prevents rapid alarm toggling when utilization hovers near the threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.14.1.4.1.3 snmpwalk -v2c -c public <target> APEX-MIB::apexOutputTsUtilMonClearAlarmDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.14.1.4.1.3.1 snmpget -v2c -c public <target> APEX-MIB::apexOutputTsUtilMonClearAlarmDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.14.1.4.1.3.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexOutputTsUtilMonClearAlarmDelay OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14 | apexOutputTransport | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1 | apexOutputTsConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1.4 | apexOutputTsUtilizationMonitoring | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1.4.1 | apexOutputTsUtilizationMonitorGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1.4.1.3 | apexOutputTsUtilMonClearAlarmDelay | APEX-MIB |