All MIBs › APEX-MIB › apexOutputTsUtilMonAlarmThreshold
apexOutputTsUtilMonAlarmThreshold
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexOutputTsUtilMonAlarmThreshold
OID (numeric): 1.3.6.1.4.1.1166.1.31.14.1.4.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The threshold, in percent, used to produce the apexAlarmOutputUtilizationFault alarm 'minor' while monitoring Output Transport Stream Bandwidth Utilization. An alarm of 'minor' will occur when this threshold is met or exceeded for apexOutputTsUtilMonSetAlarmDelay. The alarm will clear after remaining below this threshold for apexOutputTsUtilMonClearAlarmDelay.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexOutputTsUtilMonAlarmThreshold?
Configures the bandwidth utilization percentage threshold at which a minor alarm is raised for an Output Transport Stream. When utilization meets or exceeds this threshold for the configured alarm delay period, the apexAlarmOutputUtilizationFault alarm is triggered.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.14.1.4.1.1 snmpwalk -v2c -c public <target> APEX-MIB::apexOutputTsUtilMonAlarmThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.14.1.4.1.1.1 snmpget -v2c -c public <target> APEX-MIB::apexOutputTsUtilMonAlarmThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.14.1.4.1.1.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexOutputTsUtilMonAlarmThreshold OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14 | apexOutputTransport | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1 | apexOutputTsConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1.4 | apexOutputTsUtilizationMonitoring | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1.4.1 | apexOutputTsUtilizationMonitorGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.14.1.4.1.1 | apexOutputTsUtilMonAlarmThreshold | APEX-MIB |