APEX-MIB :: apexOutputTsConfApplyChange

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPEX-MIBapexOutputTsConfApplyChange

apexOutputTsConfApplyChange

Module: APEX-MIB

OID (symbolic): APEX-MIB::apexOutputTsConfApplyChange

OID (numeric): 1.3.6.1.4.1.1166.1.31.14.1.5.1.2

Node type: OBJECT-TYPE

Type: ApplyDataToDeviceTYPE

Access: read-write

Description: The apply for Output Ts Config Table. This apply is only used for apexOutputTsConfOperatingMode, apexOutputTsConfEncryptionType, and apexOutputTsConfSimulcryptMode.

A row in this table corresponds to the same row index in the Output Ts Config table.

This parameter MUST be set to 'apply' in order for the items listed above to take effect in the APEX. This parameter MUST be set LAST after the relevant data in the Output Ts Config row has been configured.

@Config(config=no, reboot=no)

What is apexOutputTsConfApplyChange?

Acts as a commit control for applying pending configuration changes to an Output Transport Stream, specifically for operating mode, encryption type, and Simulcrypt mode settings. Changes to those fields do not take effect until this object is set to apply.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.14.1.5.1.2
snmpwalk -v2c -c public <target> APEX-MIB::apexOutputTsConfApplyChange

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.14.1.5.1.2.1
snmpget -v2c -c public <target> APEX-MIB::apexOutputTsConfApplyChange.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.14.1.5.1.2.1 s <value>

Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexOutputTsConfApplyChange OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.1giproductsBCS-IDENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.1.31apexAPEX-MIB
1.3.6.1.4.1.1166.1.31.14apexOutputTransportAPEX-MIB
1.3.6.1.4.1.1166.1.31.14.1apexOutputTsConfigAPEX-MIB
1.3.6.1.4.1.1166.1.31.14.1.5apexOutputTsConfApplyTableAPEX-MIB
1.3.6.1.4.1.1166.1.31.14.1.5.1apexOutputTsConfApplyEntryAPEX-MIB
1.3.6.1.4.1.1166.1.31.14.1.5.1.2apexOutputTsConfApplyChangeAPEX-MIB