APEX-MIB :: apexMcEmmInsertionPid1

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPEX-MIBapexMcEmmInsertionPid1

apexMcEmmInsertionPid1

Module: APEX-MIB

OID (symbolic): APEX-MIB::apexMcEmmInsertionPid1

OID (numeric): 1.3.6.1.4.1.1166.1.31.1.1.2.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: First EMM PID to include in the CAT for MediaCipher Full In Band mode. Allowed values: from 0x1C00 to 0x1FFE. Default value is 0x1C02.

Once written, the change to this parameter will only take immediate effect after apexMcEmmInsertionApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.

@Config(config=yes, reboot=no) @Commit(param=apexMcEmmInsertionApplyChange , value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')

What is apexMcEmmInsertionPid1?

Specifies the PID value (in the range 0x1C00 to 0x1FFE, default 0x1C02) for the first MediaCipher EMM stream to be referenced in the CAT during Full In Band operation. This PID identifies the transport stream packets carrying conditional access entitlement messages to decoders.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.1.1.2.3
snmpwalk -v2c -c public <target> APEX-MIB::apexMcEmmInsertionPid1

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.1.1.2.3.1
snmpget -v2c -c public <target> APEX-MIB::apexMcEmmInsertionPid1.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.1.1.2.3.1 i <value>

Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexMcEmmInsertionPid1 OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.1giproductsBCS-IDENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.1.31apexAPEX-MIB
1.3.6.1.4.1.1166.1.31.1apexSysAPEX-MIB
1.3.6.1.4.1.1166.1.31.1.1apexSysConfigAPEX-MIB
1.3.6.1.4.1.1166.1.31.1.1.2apexSysConfigMcEmmInsertionAPEX-MIB
1.3.6.1.4.1.1166.1.31.1.1.2.3apexMcEmmInsertionPid1APEX-MIB