All MIBs › APEX-MIB › apexManRteGbeInRedSecLowAlarmBitRate
apexManRteGbeInRedSecLowAlarmBitRate
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexManRteGbeInRedSecLowAlarmBitRate
OID (numeric): 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.16
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This is the bit rate, in bits per second, below which the APEX will issue the apexAlarmGbeInputStreamLowBitRate alarm for the secondary interface.
The APEX will compare either the current Information rate or Stream rate as configured in apexManRteGbeInRedRateCompareType. Setting to zero disables the bit rate alarming.
The APEX updates the bit rate statistics every five seconds.
What is apexManRteGbeInRedSecLowAlarmBitRate?
Sets the minimum acceptable bit rate (in bits per second) for the secondary Gigabit Ethernet input stream. If the incoming stream drops below this threshold, the APEX raises a low-bit-rate alarm for the secondary interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.16 snmpwalk -v2c -c public <target> APEX-MIB::apexManRteGbeInRedSecLowAlarmBitRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.16.1 snmpget -v2c -c public <target> APEX-MIB::apexManRteGbeInRedSecLowAlarmBitRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.16.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> apexManRteGbeInRedSecLowAlarmBitRate.1
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexManRteGbeInRedSecLowAlarmBitRate OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.10 | apexManualRouting | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.10.1 | apexManualRoutingConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.10.1.6 | apexManualRouteGbeInputRedundConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3 | apexManRteGbeInRedTable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1 | apexManRteGbeInRedEntry | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.16 | apexManRteGbeInRedSecLowAlarmBitRate | APEX-MIB |