APEX-MIB :: apexManRteGbeInRedPriHighAlarmBitRate

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPEX-MIBapexManRteGbeInRedPriHighAlarmBitRate

apexManRteGbeInRedPriHighAlarmBitRate

Module: APEX-MIB

OID (symbolic): APEX-MIB::apexManRteGbeInRedPriHighAlarmBitRate

OID (numeric): 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.7

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This is the bit rate, in bits per second, above which the APEX will issue the apexAlarmGbeInputStreamHighBitRate alarm for the primary interface.

The APEX will compare either the current Information rate or Stream rate as configured in apexManRteGbeInRedRateCompareType. Setting to zero disables the bit rate alarming.

The APEX updates the bit rate statistics every five seconds.

Not supported.

What is apexManRteGbeInRedPriHighAlarmBitRate?

This OID sets the high bit-rate alarm threshold in bits per second for the primary GBE input interface; the APEX raises an apexAlarmGbeInputStreamHighBitRate alarm when the measured rate exceeds this value. The rate type used for comparison is controlled by apexManRteGbeInRedRateCompareType.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.7
snmpwalk -v2c -c public <target> APEX-MIB::apexManRteGbeInRedPriHighAlarmBitRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.7.1
snmpget -v2c -c public <target> APEX-MIB::apexManRteGbeInRedPriHighAlarmBitRate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.7.1 i <value>

Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexManRteGbeInRedPriHighAlarmBitRate OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.1giproductsBCS-IDENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.1.31apexAPEX-MIB
1.3.6.1.4.1.1166.1.31.10apexManualRoutingAPEX-MIB
1.3.6.1.4.1.1166.1.31.10.1apexManualRoutingConfigAPEX-MIB
1.3.6.1.4.1.1166.1.31.10.1.6apexManualRouteGbeInputRedundConfigAPEX-MIB
1.3.6.1.4.1.1166.1.31.10.1.6.3apexManRteGbeInRedTableAPEX-MIB
1.3.6.1.4.1.1166.1.31.10.1.6.3.1apexManRteGbeInRedEntryAPEX-MIB
1.3.6.1.4.1.1166.1.31.10.1.6.3.1.7apexManRteGbeInRedPriHighAlarmBitRateAPEX-MIB