APEX-MIB :: apexGbeJitterAbsorption

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPEX-MIBapexGbeJitterAbsorption

apexGbeJitterAbsorption

Module: APEX-MIB

OID (symbolic): APEX-MIB::apexGbeJitterAbsorption

OID (numeric): 1.3.6.1.4.1.1166.1.31.7.1.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object is obsolete.

Jitter Absorption setting in range of 0 to 200 milliseconds in increments of 5 ms. A change to this parameter will cause the Gigabit Ethernet processor to reset all of its internal Ethernet frame buffers. This will result in a momentary loss of data causing a minor glitch on all output streams.

Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.

@Range(step=5) @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')

What is apexGbeJitterAbsorption?

This obsolete object previously configured the jitter absorption buffer depth (0–200 ms in 5 ms steps) for the Gigabit Ethernet processor. Modifying it caused the GbE processor to reset all internal frame buffers, resulting in a brief interruption of data.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.1.3
snmpwalk -v2c -c public <target> APEX-MIB::apexGbeJitterAbsorption

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.1.3.1
snmpget -v2c -c public <target> APEX-MIB::apexGbeJitterAbsorption.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.7.1.1.3.1 i <value>

Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexGbeJitterAbsorption OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.1giproductsBCS-IDENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.1.31apexAPEX-MIB
1.3.6.1.4.1.1166.1.31.7apexGbeAPEX-MIB
1.3.6.1.4.1.1166.1.31.7.1apexGbeConfigAPEX-MIB
1.3.6.1.4.1.1166.1.31.7.1.1apexGbeConfigGeneralAPEX-MIB
1.3.6.1.4.1.1166.1.31.7.1.1.3apexGbeJitterAbsorptionAPEX-MIB