All MIBs › APEX-MIB › apexGbeInputDataTsSmoothingPeriod
apexGbeInputDataTsSmoothingPeriod
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexGbeInputDataTsSmoothingPeriod
OID (numeric): 1.3.6.1.4.1.1166.1.31.7.1.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Input Data stream smoothing period. Amount of time in milliseconds over which the GigE will smooth out input streams that do not contain PCRs. This allows the GigE to play out the input streams with the packets equally spaced out over this period. This helps to reduce network jitter and bursts of data to the output. The smoothing period is used in conjunction with the data stream buffer depth to perform this smoothing algorithm. The smoothing period must be equal to or less than the data stream buffer depth.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(bcmr.ini, type='ini')
What is apexGbeInputDataTsSmoothingPeriod?
Specifies the time window (in milliseconds) over which the GbE interface smooths out incoming transport streams that do not contain PCR timing references, spacing packets evenly to reduce downstream jitter. This applies only to PCR-less input streams.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.1.7 snmpwalk -v2c -c public <target> APEX-MIB::apexGbeInputDataTsSmoothingPeriod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.1.7.1 snmpget -v2c -c public <target> APEX-MIB::apexGbeInputDataTsSmoothingPeriod.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.7.1.1.7.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexGbeInputDataTsSmoothingPeriod OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7 | apexGbe | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1 | apexGbeConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.1 | apexGbeConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.1.7 | apexGbeInputDataTsSmoothingPeriod | APEX-MIB |