All MIBs › APEX-MIB › apexGbeInputDataTsBufferDepth
apexGbeInputDataTsBufferDepth
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexGbeInputDataTsBufferDepth
OID (numeric): 1.3.6.1.4.1.1166.1.31.7.1.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: GBE Input Data stream buffer depth. Amount of time in milliseconds that the GigE will buffer input streams that do not contain PCRs. This allows the GigE to buffer these streams to remove network jitter and then play them out with the packets equally spaced out. The buffer depth must be equal to or greater than the data stream smoothing period.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(bcmr.ini, type='ini')
What is apexGbeInputDataTsBufferDepth?
Defines how many milliseconds of data the GbE interface will buffer for input transport streams that lack PCR timing references, allowing the device to absorb network jitter before evenly replaying the packets. This setting controls the trade-off between latency and jitter tolerance for PCR-less streams.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.1.8 snmpwalk -v2c -c public <target> APEX-MIB::apexGbeInputDataTsBufferDepth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.1.8.1 snmpget -v2c -c public <target> APEX-MIB::apexGbeInputDataTsBufferDepth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.7.1.1.8.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexGbeInputDataTsBufferDepth OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7 | apexGbe | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1 | apexGbeConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.1 | apexGbeConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.1.8 | apexGbeInputDataTsBufferDepth | APEX-MIB |