All MIBs › APEX-MIB › apexGbeConfInputUnicastTimeout
apexGbeConfInputUnicastTimeout
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexGbeConfInputUnicastTimeout
OID (numeric): 1.3.6.1.4.1.1166.1.31.7.1.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Loss of input stream timeout value (in milliseconds) for unicast inputs. This determines the amount of time a unicast input stream is missing before the APEX will declare the input stream lost.
Loss of input is used for determining all SDV failover conditions. It is also used for Manual Routing failover conditions when using hot/warm transport stream redundancy.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Range(step=200) @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexGbeConfInputUnicastTimeout?
Sets the timeout (in milliseconds) the APEX device waits after a unicast input stream goes missing before declaring that stream lost. This lost-stream detection is used to trigger SDV failover conditions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.1.10 snmpwalk -v2c -c public <target> APEX-MIB::apexGbeConfInputUnicastTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.1.10.1 snmpget -v2c -c public <target> APEX-MIB::apexGbeConfInputUnicastTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.7.1.1.10.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexGbeConfInputUnicastTimeout OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7 | apexGbe | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1 | apexGbeConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.1 | apexGbeConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.1.10 | apexGbeConfInputUnicastTimeout | APEX-MIB |