All MIBs › APEX-MIB › apexGbeConfInputMulticastTimeout
apexGbeConfInputMulticastTimeout
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexGbeConfInputMulticastTimeout
OID (numeric): 1.3.6.1.4.1.1166.1.31.7.1.1.11
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Loss of input stream timeout value (in milliseconds) for multicast inputs. This determines the amount of time a unicast input stream is missing before the APEX will declare the input stream lost.
Loss of input is used for determining all SDV failover conditions. It is also used for Manual Routing failover conditions when using hot/warm transport stream redundancy.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Range(step=200) @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexGbeConfInputMulticastTimeout?
Sets the timeout (in milliseconds) the APEX device waits after a multicast input stream goes missing before declaring that stream lost. Like the unicast equivalent, this value drives SDV failover logic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.1.11 snmpwalk -v2c -c public <target> APEX-MIB::apexGbeConfInputMulticastTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.1.11.1 snmpget -v2c -c public <target> APEX-MIB::apexGbeConfInputMulticastTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.7.1.1.11.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexGbeConfInputMulticastTimeout OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7 | apexGbe | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1 | apexGbeConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.1 | apexGbeConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.1.11 | apexGbeConfInputMulticastTimeout | APEX-MIB |