All MIBs › APEX-MIB › apexGbeConfInRedundSwitchTime
apexGbeConfInRedundSwitchTime
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexGbeConfInRedundSwitchTime
OID (numeric): 1.3.6.1.4.1.1166.1.31.7.1.4.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This is the time in seconds to wait before switching back to the Primary of a Redundant Gigabit Ethernet Input TS pair after the Primary is healthy. Range is 0 to 3600. This time is in addition to apexGbeConfInRedundMonitorPeriod. Switch back to Primary will not occur if fail over is suspended for the Secondary.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via apexSaveConfig.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(gige_red.ini, type='ini')
What is apexGbeConfInRedundSwitchTime?
Specifies the additional delay (0–3600 seconds) the APEX waits after detecting that a primary GbE input stream has recovered before switching back to it from the secondary. This settling period prevents rapid oscillation between primary and secondary when the primary is unstable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.4.1.2 snmpwalk -v2c -c public <target> APEX-MIB::apexGbeConfInRedundSwitchTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.4.1.2.1 snmpget -v2c -c public <target> APEX-MIB::apexGbeConfInRedundSwitchTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.7.1.4.1.2.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexGbeConfInRedundSwitchTime OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7 | apexGbe | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1 | apexGbeConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.4 | apexGbeConfigInputRedundancy | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.4.1 | apexGbeConfigInputRedundancyGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.4.1.2 | apexGbeConfInRedundSwitchTime | APEX-MIB |