All MIBs › APEX-MIB › apexGbeConfInRedundManualRouteRedundType
apexGbeConfInRedundManualRouteRedundType
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexGbeConfInRedundManualRouteRedundType
OID (numeric): 1.3.6.1.4.1.1166.1.31.7.1.4.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The redundancy type for output streams in Manual Routing operating mode. - hotWarm indicates only 1 input stream, primary or secondary, is open at any one time. For multicast streams, primary will be joined initially. The secondary is joined after a failover (the primary will be dropped prior to joining the secondary). When falling back to the primary, the secondary is dropped (closed), then the primary is joined (opened).
- hotHot indicates both the primary and secondary streams are opened at the same time. For multicast streams, both streams are joined immediately.
Changes to the redundancy type cannot be made while there are active routes. All routes must be deleted prior to changing the redundancy type.
Once written, a save must be performed via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(gige_red.ini, type='ini')
What is apexGbeConfInRedundManualRouteRedundType?
Configures the redundancy operating mode for output streams when the device is in Manual Routing mode, choosing between hot-warm (only one stream open at a time, with failover join) or other supported modes. This setting determines how quickly the device can switch to a backup stream when a failure is detected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.4.1.6 snmpwalk -v2c -c public <target> APEX-MIB::apexGbeConfInRedundManualRouteRedundType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.4.1.6.1 snmpget -v2c -c public <target> APEX-MIB::apexGbeConfInRedundManualRouteRedundType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.7.1.4.1.6.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexGbeConfInRedundManualRouteRedundType OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7 | apexGbe | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1 | apexGbeConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.4 | apexGbeConfigInputRedundancy | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.4.1 | apexGbeConfigInputRedundancyGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.4.1.6 | apexGbeConfInRedundManualRouteRedundType | APEX-MIB |