All MIBs › APEX-MIB › apexGbeConfIfRedundSuspendFailover
apexGbeConfIfRedundSuspendFailover
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexGbeConfIfRedundSuspendFailover
OID (numeric): 1.3.6.1.4.1.1166.1.31.7.1.7.2.1.4
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: Enables and disables suspending of Interface failover. Prevents failovers to or from backup. Force failover (apexGbeConfIfRedundForceFailover) overrides this setting.
Once written, the change to this table will only take immediate effect after apexGbeConfIfRedundApplyChange is set to 'apply'. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via apexSaveConfig.
@Config(config=yes, reboot=no) @Commit(param=apexGbeConfIfRedundApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(gige_red.ini, type='ini')
What is apexGbeConfIfRedundSuspendFailover?
Temporarily suspends automatic failover between the primary and secondary GbE interfaces, preventing the device from switching paths due to link events. A force-failover command (apexGbeConfIfRedundForceFailover) overrides this suspension.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.7.2.1.4 snmpwalk -v2c -c public <target> APEX-MIB::apexGbeConfIfRedundSuspendFailover
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.7.1.7.2.1.4.1 snmpget -v2c -c public <target> APEX-MIB::apexGbeConfIfRedundSuspendFailover.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.7.1.7.2.1.4.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexGbeConfIfRedundSuspendFailover OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7 | apexGbe | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1 | apexGbeConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.7 | apexGbeConfigInterfaceRedundancy | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.7.2 | apexGbeConfigInterfaceRedundancyTable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.7.2.1 | apexGbeConfigInterfaceRedundancyEntry | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.7.1.7.2.1.4 | apexGbeConfIfRedundSuspendFailover | APEX-MIB |