All MIBs › APEX-MIB › apexEnableOutputOverflow
apexEnableOutputOverflow
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexEnableOutputOverflow
OID (numeric): 1.3.6.1.4.1.1166.1.31.102.1.8041
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: This setting enables or disables apexAlarmOutputOverflow.
When set to 'enabled' the alarm will operate as described.
When set to 'disabled' the alarm will not be reported or wrapped into unitAlarmStatus and the alarm condition will remain 'ok'. If the alarm condition is not 'ok' when it is 'disabled', the alarm will be cleared.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexEnableOutputOverflow?
Controls whether the device raises an alarm when an output channel overflows, meaning more data is being directed to the output than it can carry. When enabled, this condition is reported as a fault and rolled into the overall unit alarm status.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.102.1.8041 snmpwalk -v2c -c public <target> APEX-MIB::apexEnableOutputOverflow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.102.1.8041.1 snmpget -v2c -c public <target> APEX-MIB::apexEnableOutputOverflow.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.102.1.8041.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexEnableOutputOverflow OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.102 | apexConfigAlarms | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.102.1 | apexConfAlarmEnable | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.102.1.8041 | apexEnableOutputOverflow | APEX-MIB |